Stangnet Home

Warbird Home

Mustang
Tech

My Fixit Shop

Meet the owner

Table of Contents

Mustang Door Lock Actuator Retrofit

Stuck with door lock actuators that don't work and don't want to pay the $50 for a new one? Tried the junkyard ones and found that they last six months and freeze up? If the answer to either one of these questions is yes, and you have some mechanical talent and a few simple hand tools, you can refit the door lock actuators with new style units for approximately $17 for one side. The additional cost is to do both sides is only about $6.00 more.

 Watch for the (*): it indicates some important additional notes located at the end of this web page.

Bill of materials

Parts:

Part name part number Quantity source cost  Total
Door lock actuator 330-010 1 each  www.partsexpress.com $3.85 $3.85 (*1)
8-32 machine screw, 3" long   1  (1 pkg) Home Depot or 
ACE Hardware
$0.86  $0.86
8-32 self-locking nuts    3  (1 pkg) Home Depot or
 ACE Hardware
$0.75 $0.75
1/2" square steel tube (*2)   1 each  Home Depot or 
ACE Hardware
$4.48 $4.48
#19 drill bit    1 each ACE Hardware $2.79 $2.79
Scotchlok wire splices, 18 gauge   2 each (*3)   $0.25   $0.50 
1/2" rigid tubing, copper or PVC    12"   $0.40 $0.40
1/2" Nylon plug buttons Body-Tite! #45840 Local auto parts $1.58 $1.58
Fender washers, 
1/4" hole (*5)
  2 Home Depot or 
ACE Hardware
$.0.25 $0.50
Panel/trim retainers (*6) Body-Tite! #45476 1  (1 pkg) Local auto parts $1.69 $1.69
        Total $17.40

Some products are sold by the package (pkg) and may have more than the  minimum number of components in a package.

Tools:

Common 6" screwdriver   Phillips 6" #2 screwdriver
Hack saw   Drill, electric or pneumatic (air drill)
1/2" drill bit, reduced shank to fit drill chuck   11/32" box end wrench
3/8" socket, 1/4" drive   "6 steel scale or ruler
10" flat  file   Bench vise
Pliers   Center Punch

Click here to view next page                                                                Page 1 of 8

 
Problems with or questions about this site email jrichker@yahoo.com  

This page last updated 11/26/02                                                        
Like to have your own web page but don't know how? Contact me at the above email address.