Here's a freebie for those of you with metal working skills. The floor plate rests on the floor under the clutch & brake pedals. The bottom pedal block and floor plate are welded to the steel tubing & 3/4" steel rod. The top pedal block is welded to the 1" steel tubing which slides up & down on the 3/4" steel rod. The bottom pedal plate is a snug fit under the brake & clutch pedals, while the top pedal plate slides down on top of the brake & clutch pedals. The top pedal plate & steel tube assembly have a 3/8"hole drilled in the tube & 3/4" rod so that the pedal plate clamps down on the pedals. The cutouts in the two square steel tubes keeps the whole thing from shifting sideways. Some of the measurements may need changing since I haven't tried to make a prototype. Don't try to make and sell these widgets, since I copied the idea from a similar commercial product, but modified it for the 5 Speed Mustang. However, you can build and use as many as you like for your own personal use.