CUSTOM MADE ORDERS

HANK BREEDLOVE MACHINE SHOP

You need it, I make it.

Now this strange little item was made for use onboard a cruise ship. The rail on the poop-deck (or whatever they called it) was at a forty five degree angle. He wanted to clamp to the rail and be able to set the antenna back to vertical. The clamp has a range of 3-3/4 inches, down to nothing. The swing arm double locks to the circle in any position and is all aluminum construction. The clamp screws for one side are all that are needed down to 2 inches wide. If clamping to something smaller then screws are used on both sides. The screws are stainless steel. Push plates are included for protecting the rail from marks.

Also incorporated but not shown, a hole in the circle so that the quick disconnect mount that is used on top will also install on the circle so the clamp can be used when you have to install to the side of a rail or table top. No swing adjustment, but in most cases you would already be vertical. You will find pictures of how it was used HERE

A special order stake pocket bracket that is 3 inches wide, 3/8 inch thick and has a 3/8-24 threaded hole for the antenna. It also included a large diameter (1-1/2'') brass nut that locked in place to screw onto the antenna stud that extended thru the plate. The guy who bought this said his antenna was that big on the base. I can custom design and modify my brackets to anything you want for just a small increase in the price. This one is priced at only $65.00 If you have a design of your own in mind, just email or call and we can talk and settle on a price before I build.